Volkswagen Media Device Interface (MDI) Firmware Upgrades
Firmware upgrades to the Media Device Interface (MDI) are performed using the USB cable and a suitable USB storage device, the upgrade cannot be performed using the iPod/iPhone cable. Detailed instructions and possible error messages are detailed on the firmware version update pages.
Firmware Versions
MDI 0530-0546 KW22-2012 (this is only for vehicles produced from week 22 of 2012 – it will not install on older versions of hardware)
General Notes (for all versions)
- Only USB 2.0 hard drive and usb flash drives should be attached to the USB cable.
- No USB cable extenders should be used, only a USB cable or a USB powered hub.
- The hard drive and flash drives should be formatted with the FAT file system FAT16 for <2GB devices and FAT32 for >2GB devices.
- Complex file structures will create delays in reading the contents.
- Only the first partition is playable if the device has multiple partitions.
- Memory card adapters are not supported.
- MP3, WMA, OOG Vorbis and AAC format files are supported, 3GP and WMA lossless files are not supported. WMA files that are DRM (Digital Rights Management) protected will not play.
- Variable Bit Rate (VBR) MP3′s will not show time remaining.
- DRM protected M4P and similar files will not generally play back from mass storage (USB).
- PLS, B4S, ASX and WPL playlists are supported.
- Playlists must reside in the same directory as the media file.
- MTP (Media Transfer Protocol – displaying the logo ‘PlaysForSure’ and ‘ReadyForVista’) may take several minutes to start playing as they request information such as battery status and memory usage from the MDI.
- Devices can be hot plugged at any time without loss of data.
- The Interface provides 5V for charging (standard USB)
- Folder structure should not exceed 8 folder levels and folders should contain no more than 1000 files.
- The Apple iPod and iPhone should only be connected with the iPod cable with the exception of the iPod Shuffle which can connect through the USB cable.
DIY: MDI update walkthrough
You will need the following parts:
1. MDI to female USB adaptor
vw part # 000 051 446 B
2. USB drive formatted as FAT32
1. MDI to female USB adaptor
vw part # 000 051 446 B
2. USB drive formatted as FAT32
can you help . looking for 2014wv polo finware ? thanks mate
ReplyDeletehttps://www.youtube.com/watch?v=DsYS6y09MTk
ReplyDelete